Free VST - Chris Hooker - Octaver OC-D2 VST Plugin

OC-D2 is a mono octave divider plug-in that generates signals one and two octaves below the original. It's based on the popular Boss OC-2 pedal, but with many more features and customizability far beyond what other octavers offer (both pedal and plug-in types).

Overview:

• Control the tracking accuracy.

• Control the oscillator tone.

• Control the dynamic envelope.

• View the waveforms.

• Tap the audio at any stage.

Access the inner workings. Take control of your octaver!

Full Feature List:

• Controls to all the typically fixed values for low-pass filters - both on the oscillator outputs (changes tone from full square wave to pure sine, or anywhere in between) as well as on the detection circuit (which can fine-tune the accuracy of the octave-divider's tracking).

• Option for two modes of operation: additive oscillators or phase-multiplier.

• The additive mode simply mixes in the octave down signals (via user-adjustable levels and wet/dry balance), whereas the phase-multiplier mode flips the phase of the key signal, following the state of the selected oscillator.

• In additive mode, dynamics for the oscillators can be controlled either by a noise gate or an envelope follower, both keyed off the input signal. In phase-multiplier mode, the full dynamics of the key signal are retained.

• A DC-offset switch corrects the input signal to improve tracking on rectified or offset signals.

• A scope displays both the key signal and the output signal, so the user can see how the plug-in is operating, and help identify what controls need to be adjusted in order to track more accurately or produce the intended sound. Includes a "Scope Tuning" control to affect the zoom ratio.

• "Listen" radio buttons allow the user to tap the audio at any stage to hear what's happening behind the scenes, and bypass certain sections if desired.

• Many users of the Boss OC-2 pedal seek to add a hardware modification that disables the output filter and dynamics sections in order to produce a more synth-like tone. This plug-in has the capability to easily reproduce this mod, by adjusting only a few parameters.
   

Included are some presets that run through the capabilities of the plug-in.

Download for Free!
Version 1.01 32-bit floating point processing Mono VST.

Developer: Chris Hooker

DOWNLAOD (Win)